Ever wished for a programmer that can program all your PIC variants and yes through USB? I have got just the right hardware,firmware and software you need to get through. And the best thing about it is, its really cheap, as compared to the PICkit and other ISP solutions.
All you will have to do is:
1) Etch the layout on your PCB, lay down the component and solder them.
2) Download the firmware hex file to your P18F2550 controller. (You will require some other programmer to do this. Grab one from the lab for the time).
3) Place your controller on your board.
4) Install the PC Programming Software. And your good to go 
USB PIC PROG Website:
You will find a detailed tutorial on their website to get you through. Cheers!
No comments:
Post a Comment