The project intends to interface the microcontroller with the LCD and Heart beat monitoring system and send the information like heartbeat pulses of the patient to the doctor’s work station on LCD. The project uses the LCD, Heartbeat sensor and Embedded Systems to design this application. The main objective of this project is to design a system that continuously monitors the heartbeat of the patient and if they are likely to exceed the normal values, the system immediately sends a message to the doctor’s LCD.
This project is a device that collects data from the sensors, codes the data into a format that can be understood by the controlling section. This system also collects information from the master device and implements commands that are directed by the master.
The software application and the hardware implementation help the microcontroller read the output of the sensors and send these values to the doctor’s mobile whenever he sends a request to the controlling unit. The measure of efficiency is based on how fast the microcontroller can read the sensor output values and send a message to the doctor’s mobile whenever these parameters exceed the normal values. The system is totally designed using LCD and embedded systems technology.
The Controlling unit has an application program to allow the microcontroller read the sensor output values and send them to the user mobile whenever he sends a request to the controlling unit. The performance of the design is maintained by controlling unit.
No comments:
Post a Comment