Electrical Engineering Projects

• Mobile technology (GSM) based remote monitoring and control of digital Energy meter. Useful for Electricity Department personal for remote meter reading. Also useful to disconnect the power supply to consumer incase of non-payment of electric bill. This is also used to exchange messages like power cut timings with the consumers.
• DC Motors speed synchronization for rolling mills.
• Touch Screen based digital devices control system. This project is to build a Graphical LCD Touch Screen interface for switching electrical devices. The controlled devices can be of high voltage or low voltage.
• Wireless Energy Meter monitoring system with automatic tariff calculation.
• DC Motor Speed and direction control over GSM Mobile/Modem.
• Energy meter per-day average, Max and Min Load display on Graphical LCD.
• MMC/SD card based data logger for energy meter with time and KWH readings for historical data logging and analysis.
• PIR based energy conservation system for corporate Computers and lighting system.
• Wireless power theft monitoring system and indication at local substations.
• Touchscreen controlled lamp dimmer for next generation apartments.
• Microconroller and Touchscreen controlled motor speed and direction controlling system.
• Touchscreen operated industrial oil dispensing system (OIL SCADA).
• Dual (active and standby) Lithium-ion battery charger for continuous non-interrupted power supply to critical loads.
• Graphical LCD and Touch Screen based Electrical devices control system.
• Implementation of wireless sensors network based industrial temperature monitoring system.
• Touchscreen based advanced temperature monitoring and control system with graphical LCD.
• GSM based Irrigation Water Pump Controller for Illiterates. (No Mobile phone operation knowledge required).
• Triac and optically isolated diac based electrical oven temperature monitoring and controlling system with zero-crossing detector.
• High power LED based intelligent streetlight controlling system with automatic brightness control with vehicle presence sensor.
• Timer based Electrical Oven temperature monitoring and control for Metal Industries.
• GSM based SCADA implementation using Microcontroller.
• Microcontroller based Substation Monitoring and control.
• Microcontroller based Generator/Alternator Control and Monitoring System
• Electrical Data (voltage, current, frequency etc...) Logger. The purpose of this project is to log electrical data at remote locations like substations. The data is sensed using various electrical sensors and processed by microcontroller. This processed data is stored in a MMC memory stick connected to the microcontroller board. This data can be downloaded to computer for further processing.
• Microcontroller based Single phasing preventor.
• Microcontroller based Solar Tracker with Stepper Motor Control.
• PWM based DC Motor Closed loop Speed Controller.
• Frequency Locked Loop (FLL) DC Motor Speed Control
• Radio Frequency (RF) based Wireless Control Of DC/Stepper Motor Speed Control.
• RF based Wireless Electrical Devices Controller.
• Motor Speed Monitoring over GSM Mobile.
• Microcontroller based refrigeration control system.
• Timer based automatic power cutoff for industrial sealing/packaging machines.
• Wireless SCADA.
• GSM/Mobile/Cell Phone Based Device Monitoring and Control.
• GSM Based Automatic Irrigation Water Controller System
• Automatic Intelligent Plant Watering System
• IR (Infrared) Remote based Stepper Motor Speed and Direction Controller
• RC5 IR Based Remote Device Switching
• The Robot that follows the (Infrared) Light
• Frequency Locked Loop DC Motor speed monitoring and control system.
• Digital Tachometer (Non-contact)
• Digital Voltage, Current and Frequency Meter.
• SCADA system design and construction for real-time electrical parameter monitoring and control.
• Transformer oil temperature monitoring with automatic Circuit Breaker operation.
• GSM/Mobile/Cell Phone Based Device Monitoring and Control System.
• Substation Fuse blown Indicator.
• Mobile phone controlled Street Light monitoring and control system.
• UPS battery monitoring system over GSM for high availability systems (banking/finance/medical etc).
• DTMF mobile phone controlled dam water gates controlling system with high-level protection.
• DC Motor Speed and direction control using RF/IR/Zigbee technologies.
• Hazardous chemical valve control system with stepper motor and line of site remote control.
• Contact less Motor speed monitoring on Graphical display with high and low speed alerts.
• Design and construction of Earth fault relay for single phase power system.
• RF transceiver (Zigbee/X-Bee) based energy meter monitoring system. (Energy Meter reading on PC over wireless comm.)
• Talking energy (KWH) meter.
• Password enabled pre-paid liquid/milk dispensing system.
• High voltage fuse blown indicator with display on PC with optical isolation between PC and HV bus bars.